Monday, May 5, 2008
Pocket Spot
Here is the Pocket Spot in the rare red model. Most units are all black with white laser scribed writing and red LED display. Single LEDs on display indicate 1/3 and 2/3 addition EVs. The meter is 2.25" long and a little wider than 2". Body is 3/4" thick and the dials adds 1/8". Finish is black anodized over a solid block of machined aluminum. It weighs 4 1/8 oz (117 grams) with strap and battery, both included. EV range is -1 2/3 to 23 at 100 ASA. Spectral sensitivity is compensated for "typical" B&W film. Angle of view is approximately 1 degree. Viewing is by bore-sighting through the hole the length of the chassis. Battery is the 6V PX28.
Subscribe to:
Post Comments (Atom)
Pocket Spot
Pocket Spot
Pocket Spot Spec Sheet
Pocket Spot Digital Light Meter Specs
Display: 2-digit Red LED with 1/3, 2/3 LED indicators
Dial: White, laser-engraved on Meter's anodized color background. Intermost dial is ISO with f/# on the outside. f/1.0 to f/128. Outer dial is shutter speeds from 8 minutes to 1/4000 sec on the inside and EV on the outside. EVs from -1 to 20. Body is marked with Zones from Zero to X (10). [Romans didn't have a zero, but what are you going to do? ]
ISO: 3 to 12800 ISO, marked in 1/3 stops
EV range: -1 2/3 to 23 at 100 ISO
Spectral Sensitivity: Compensated for "typical" B&W film, i.e. HP5+ or Tri-X
Angle of View: approximately 1 degree, smaller at very high EVs and 3 degrees at lower EVs
Viewing: Bore-sight through the hole the length of the chassis. Meter is held about 12" or 300mm from the eye (length of strap)
Linearity: about 1% from low to high.
Calibration: Not required. No adjustments inside.
Finish: Black anodized over a solid block of machined aluminum. Texture is random tumble over stones before anodize. Other colors in consideration at extra cost are RED and BLUE.
Battery: 6V PX28 or equivalent, Supplied
Dimensions: 2.25" x 2" x 3/4" (L x W x T) 57 x 50 x 19 mm
Dial on top is 1/8" thick, 3 mm
Weight: 4 1/8 oz (117 grams) with strap and battery, both included.
specifications subject to change
More pictures on page two near bottom.
Display: 2-digit Red LED with 1/3, 2/3 LED indicators
Dial: White, laser-engraved on Meter's anodized color background. Intermost dial is ISO with f/# on the outside. f/1.0 to f/128. Outer dial is shutter speeds from 8 minutes to 1/4000 sec on the inside and EV on the outside. EVs from -1 to 20. Body is marked with Zones from Zero to X (10). [Romans didn't have a zero, but what are you going to do? ]
ISO: 3 to 12800 ISO, marked in 1/3 stops
EV range: -1 2/3 to 23 at 100 ISO
Spectral Sensitivity: Compensated for "typical" B&W film, i.e. HP5+ or Tri-X
Angle of View: approximately 1 degree, smaller at very high EVs and 3 degrees at lower EVs
Viewing: Bore-sight through the hole the length of the chassis. Meter is held about 12" or 300mm from the eye (length of strap)
Linearity: about 1% from low to high.
Calibration: Not required. No adjustments inside.
Finish: Black anodized over a solid block of machined aluminum. Texture is random tumble over stones before anodize. Other colors in consideration at extra cost are RED and BLUE.
Battery: 6V PX28 or equivalent, Supplied
Dimensions: 2.25" x 2" x 3/4" (L x W x T) 57 x 50 x 19 mm
Dial on top is 1/8" thick, 3 mm
Weight: 4 1/8 oz (117 grams) with strap and battery, both included.
specifications subject to change
More pictures on page two near bottom.
1 comment:
What a tease!
Do you have a plan yet for the new production run?
Post a Comment